Anyone interested in a 10 x 17 baffle with W.G.

[Pete Schumacher]

Re: Anyone interested in a 10 x 17 baffle with W.G.

With the quality of work that he has done for you as an idea of how well done these will be, $75/pr seems reasonable to me.

Chris

just between you and me . . . it's a steal.

[czag]

Re: Anyone interested in a 10 x 17 baffle with W.G.

Ed's cutting it into baffles, to go along with the flat pack theme, to use with existing PE cabinets, and that takes a good deal of time to make. $75/pr seems pretty decent to me, especially when a flat, uncut baffle for that same cabinet costs $38/pr from PE.

With the quality of work that he has done for you as an idea of how well done these will be, $75/pr seems reasonable to me.

Chris

[Pete Schumacher]

Re: Anyone interested in a 10 x 17 baffle with W.G.

I'd want just the waveguide part - either squares, or, two on a rectangle and I can cut it and put it in a baffle.

At least, something that would fit in a USPS Priority Mail Medium Flat Rate Box.

Maybe somebody can come up with a better price too?

If the back is cut just right to fit the tweeter that adds value, of course...

The beauty of the baffle with the waveguide, is that's it's a baffle with a waveguide carved into it. One piece, no seams, far nicer look than any type of bolt-on would give. Ed's cutting it into baffles, to go along with the flat pack theme, to use with existing PE cabinets, and that takes a good deal of time to make. $75/pr seems pretty decent to me, especially when a flat, uncut baffle for that same cabinet costs $38/pr from PE.

I think some of the guys are trying to get that profile produced in fiberglass as a bolt on which would seem to be more what you're looking for.

[critofur]

Re: Anyone interested in a 10 x 17 baffle with W.G.

I'd want just the waveguide part - either squares, or, two on a rectangle and I can cut it and put it in a baffle.

At least, something that would fit in a USPS Priority Mail Medium Flat Rate Box.

Maybe somebody can come up with a better price too?

If the back is cut just right to fit the tweeter that adds value, of course...

[czag]

Re: Anyone interested in a 10 x 17 baffle with W.G.

Would they have any sort of finish applied to them?

Chris

[Pete Schumacher]

Re: Anyone interested in a 10 x 17 baffle with W.G.

i would. made from what material? just because the baffle is just 17" tall, does not mean it could not be used on a larger inclosure, right? do you have a sample? could it be alyptical like the one pete was working with?

That's exactly the WG he's talking about. Ed sent me a couple of "test mules" that are at my feet right now. They have that WG I tested with the RS28F. And they are exact matches for the PE .75cf cabinets.

Ed made them from MDF, but a really good grade of MDF used for stair treads.

[[email protected]]

Re: Anyone interested in a 10 x 17 baffle with W.G.

i would. made from what material? just because the baffle is just 17" tall, does not mean it could not be used on a larger inclosure, right? do you have a sample? could it be alyptical like the one pete was working with?

[D, Rose]

I noticed the flat-pack sets for DIY guys, and was wondering if anyone would be interested in a standard 10" x 17" baffle that would fit P.E.s cabs, with the W.G. that seems to perform best carved in the top. I might have to charge 75 bucks or more for a set. Is that reasonable?