I know it is early, but.... InDIYana??

[cjd]

Re: I know it is early, but.... InDIYana??

Aaaand, I've moved into the "iffy but probably not" camp due to something that came up family-wise. Sigh. Never fails, eh?

[Wolf]

Re: I know it is early, but.... InDIYana??

Wolf, I am going to be there and I have a friend coming along for the ride. He is into car audio and I'm trying to show him that audio is more than the size of your sub. ;)

Also I will be bringing a set of speakers; I'm just not sure if the new mltl boxes will be finished.

I have you down, Duane. You weren't in the maybe section, but thanks for the note on more than just you.

Later,
Wolf

[Wolf]

Re: I know it is early, but.... InDIYana??

Aaaand, I've moved into the "iffy but probably not" camp due to something that came up family-wise. Sigh. Never fails, eh?

Well- that's to be expected. Let me know if things change or you can still end up making it. I'll leave you in the 'maybe' box for now.

Thanks,
Wolf

[maynardg]

Re: I know it is early, but.... InDIYana??

Wolf,

I fear I must advise that I am better less 50% likely to attend. As much as I like it, the trip does consume 4 days and some hours for me. Too old to drive straight through twice in 4 days anymore after adding the non-stop activity...

Add to that recently increased demands at work... Nothing new to show - except the Malbecs for those who did not hear them at IA in2010.

All will depend on the circumstances on the Wednesday prior.

As the OP for this thread, it pains me. The good news is I will have something new for IA - and the IA folks have not heard the Continuum MLTL's either.

Will keep you posted.

[Wolf]

Re: I know it is early, but.... InDIYana??

Will keep you posted.

Thanks for the update, Maynard!
Wolf

[bkeane1259]

Re: I know it is early, but.... InDIYana??

Using almost all surplus XO parts for my Rat Rockers. Unfortunately, I'm having to add a lot of parts to get the required values. Wasn't expecting this....sometimes I wonder why I get myself into stuff like this. At least the weather has been cooperating, so I will shut my flapper now and stop complaining. ;)

[Wolf]

Re: I know it is early, but.... InDIYana??

Love it!! :D:D
Wolf

[marvin]

Re: I know it is early, but.... InDIYana??

Using almost all surplus XO parts for my Rat Rockers. Unfortunately, I'm having to add a lot of parts to get the required values. Wasn't expecting this....sometimes I wonder why I get myself into stuff like this. At least the weather has been cooperating, so I will shut my flapper now and stop complaining. ;)

Shouldn't there be some sawdust somewhere? That bench looks like a lab!:D

[benchtester]

Re: I know it is early, but.... InDIYana??

... I'm having to add a lot of parts to get the required values....

I wouldn't expect anything less in a Rat Rocker.

Shouldn't there be some sawdust somewhere? That bench looks like a lab!:D

But you better get them off the kitchen counter before the wife gets home.... ;)

[bkeane1259]

Re: I know it is early, but.... InDIYana??

Haha...I do the crossover designing on the dining-room table because it's right next to my workstation where I do my testing. Makes it much easier for me. Luckily it's a granite top table, so even in my many moments of clumsiness I have yet to damage it. I have no choice tho...this is what happens when you live in the big city......Big city....Small house. My garage is an absolute mess right now. Can't even squeeze one car in it. The wife IS NOT impressed right now....trust me. I won't be posting anymore pics till after the show. Well...maybe a few teasers. :p

[mikejennens]

Re: I know it is early, but.... InDIYana??

... Can't even squeeze one car in it. The wife IS NOT impressed right now....trust me...

Car??? I thought garages were for building things. Cars work fine in the cold; my fingers don't. Cars, huh??? Go figure...

[Taterworks]

Re: I know it is early, but.... InDIYana??

I'm late to the thread party, but I'll be there on Friday (arriving Thursday PM) with my full front end:

Marantz CD5004
Musical Fidelity V-DAC (1st Gen)
Mark Levinson No. 38 (balanced or unbalanced outs)
Hafler 9270 (135w/ch @ 8ohms)
Target Audio sand-loaded speaker stands

I'll have the Firestorms there with their final crossover version (not yet heard by an event audience). I may or may not have them in their final cabinets by then, but I prefer the original red ones anyhow. Any actual new stuff will probably have to wait for Dayton.

See you all there.

[Wolf]

Re: I know it is early, but.... InDIYana??

We shouldn't need the Hafler, but you can bring it as a backfall in case something becomes a hindrance.
Matt will have the dual ComTech 1600's, and likely the XLR and speaker cables.
Later,
Wolf

[isaeagle4031]

Re: I know it is early, but.... InDIYana??

If we need more power for some reason, I've got a crown comtech and macrorefrence I could bring

On another front, I'm not sure my rat rockers are gonna make it. Blew a piston on 1 side. Still trying though. Gotta see.;)

[dlneubec]

Re: I know it is early, but.... InDIYana??

The other day at the office, I noticed a big stack of cardboard tubes. They are from paper rolls that go into our large scale plotter (printer). The tube wall are a dense, hard cardboard, probably 1/8" thick and mostly 3" I.D. with some that are 2". The range in length is probably 2' to 3'.

There were probably 30+ tubes in that stack, probably headed toward recycling. They should make great port tubes. I could probably grab a bunch and bring them along if anyone was interested.