Announcement

Collapse
No announcement yet.

I know it is early, but.... InDIYana??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    Ge-BUMP!

    I would appreciate an updated headcount if you are not present on the attendee list, or want to change your maybe status.

    Please PM, e-mail, or post you are attending if you have not done so.
    That said- we're sitting at about 20-23 pair give or take, and not quite 30 people.

    Later,
    Wolf
    "Wolf, you shall now be known as "King of the Zip ties." -Pete00t
    "Wolf and speakers equivalent to Picasso and 'Blue'" -dantheman
    "He is a true ambassador for this forum and speaker DIY in general." -Ed Froste
    "We're all in this together, so keep your stick on the ice!" - Red Green aka Steve Smith

    *InDIYana event website*

    Photobucket pages:
    https://app.photobucket.com/u/wolf_teeth_speaker

    My blog/writeups/thoughts here at PE:
    http://techtalk.parts-express.com/blog.php?u=4102

    Comment


    • #77
      Re-Bump!

      .
      "Wolf, you shall now be known as "King of the Zip ties." -Pete00t
      "Wolf and speakers equivalent to Picasso and 'Blue'" -dantheman
      "He is a true ambassador for this forum and speaker DIY in general." -Ed Froste
      "We're all in this together, so keep your stick on the ice!" - Red Green aka Steve Smith

      *InDIYana event website*

      Photobucket pages:
      https://app.photobucket.com/u/wolf_teeth_speaker

      My blog/writeups/thoughts here at PE:
      http://techtalk.parts-express.com/blog.php?u=4102

      Comment


      • #78
        Re: Ge-BUMP!

        Originally posted by Wolf View Post
        I would appreciate an updated headcount if you are not present on the attendee list, or want to change your maybe status.

        Please PM, e-mail, or post you are attending if you have not done so.
        That said- we're sitting at about 20-23 pair give or take, and not quite 30 people.

        Later,
        Wolf
        Thanks so much for putting in the time and effort to make this happen. I'm really looking forward to it. I assume it'll be a little less structured than MWAF, and we'll be able to sit back and enjoy some music. While I really liked past year's MWAFs, I really wanted to be able to sit in the "sweet spot" for a while and listen intently to the differences among speakers. I always seem to be at the back of the room, and have to hear the music filtered through three dozen heads.
        Eric L.

        Comment


        • #79
          Re: Ge-BUMP!

          Originally posted by brkitup View Post
          Thanks so much for putting in the time and effort to make this happen. I'm really looking forward to it. I assume it'll be a little less structured than MWAF, and we'll be able to sit back and enjoy some music. While I really liked past year's MWAFs, I really wanted to be able to sit in the "sweet spot" for a while and listen intently to the differences among speakers. I always seem to be at the back of the room, and have to hear the music filtered through three dozen heads.
          It's a lot more laid back than MWAF. We have a lot more time, a lot fewer entries, and a lot less chaos. It's the 5min house/5min designer for cuts, so bring your demo-disc.

          Update:
          It also looks like there will be a FR driver shootout after dinner on Friday evening. It shouldn't take much time.

          Later,
          Wolf
          "Wolf, you shall now be known as "King of the Zip ties." -Pete00t
          "Wolf and speakers equivalent to Picasso and 'Blue'" -dantheman
          "He is a true ambassador for this forum and speaker DIY in general." -Ed Froste
          "We're all in this together, so keep your stick on the ice!" - Red Green aka Steve Smith

          *InDIYana event website*

          Photobucket pages:
          https://app.photobucket.com/u/wolf_teeth_speaker

          My blog/writeups/thoughts here at PE:
          http://techtalk.parts-express.com/blog.php?u=4102

          Comment


          • #80
            Re: I know it is early, but.... InDIYana??

            I just might have to rent a white van... so I can bring the big speaks out to play for once. If I can verify I'll be around that weekend (work may put me in India for a few weeks or more...)

            If I make it I can haul amps just as easily too... if desired.
            diVine Audio

            Comment


            • #81
              Re: I know it is early, but.... InDIYana??

              I'm aiming to make it--I have the drivers waiting around for another build I intend to have done by then, which would be fitting to use the tweets I took home from the last InDIYana event I was at.

              I could also bring a pair of Curt's Sten IIs...

              Mike

              Comment


              • #82
                Re: I know it is early, but.... InDIYana??

                K, I just argued........I mean....talked it over with the wife:D I got the green lite!!! this is my first DIY event and I cant wait
                "The defintion of Insanity is: doing the same thing over and over again and expecting different results." Albert Einstein

                Comment


                • #83
                  Re: I know it is early, but.... InDIYana??

                  Originally posted by cjd View Post
                  I just might have to rent a white van... so I can bring the big speaks out to play for once. If I can verify I'll be around that weekend (work may put me in India for a few weeks or more...)

                  If I make it I can haul amps just as easily too... if desired.
                  I don't think the amps will be needed. Matt has a pair of Crown Com-Tech 1600 that are about 800W parallel-mono. I think the power is plenty.

                  Still- that would be a nice thing to get you out for another event.

                  I got Mike, Mike, and CJD on the list as they stated.
                  Later,
                  Wolf
                  "Wolf, you shall now be known as "King of the Zip ties." -Pete00t
                  "Wolf and speakers equivalent to Picasso and 'Blue'" -dantheman
                  "He is a true ambassador for this forum and speaker DIY in general." -Ed Froste
                  "We're all in this together, so keep your stick on the ice!" - Red Green aka Steve Smith

                  *InDIYana event website*

                  Photobucket pages:
                  https://app.photobucket.com/u/wolf_teeth_speaker

                  My blog/writeups/thoughts here at PE:
                  http://techtalk.parts-express.com/blog.php?u=4102

                  Comment


                  • #84
                    Re: I know it is early, but.... InDIYana??

                    This is gonna be good, especially with the Rat-Rocker theme. Can't wait....wait, yes I can...not done with my rat rocker yet :eek:

                    As a matter of fact I'm having some issues with the drivers I'm trying to integrate, but it's too late to change the plans......press on, press on.....
                    Bryan K.

                    Midwest Audio Club

                    Speedster | | The Wildeman | Sean's NLA Towers | , COUGAR II and | Triton | Lithium | J-Boom | Trym MLTL | Docere MLTL

                    Comment


                    • #85
                      Re: I know it is early, but.... InDIYana??

                      I am locked in. I'll also be bringing a pair of monitors I'd like to get some feedback on--maybe just a quick little play on Friday night.

                      SEE YA'LL SOON! :D

                      Comment


                      • #86
                        Re: I know it is early, but.... InDIYana??

                        Amps would need to be 2ohm stable for mine. If they show. Van rental is a couple hundred bucks and my fridge died this morning so we'll have to wait and see. Can always bring out the Ansonica for another showing.
                        diVine Audio

                        Comment


                        • #87
                          Re: Ge-BUMP!

                          Originally posted by Wolf View Post
                          ...It also looks like there will be a FR driver shootout after dinner on Friday evening. It shouldn't take much time....
                          If I can get there in time, add my Drive-ins to the FR shootout (ported PS180)

                          Frank

                          Comment


                          • #88
                            Re: I know it is early, but.... InDIYana??

                            I'm from Western MD, it's basically an 8 hour drive, but I reallly want to make it out. It's the 13-14? I may have a pair of towers I can bring too!

                            Comment


                            • #89
                              Re: I know it is early, but.... InDIYana??

                              Originally posted by cjd View Post
                              Amps would need to be 2ohm stable for mine. If they show. Van rental is a couple hundred bucks and my fridge died this morning so we'll have to wait and see. Can always bring out the Ansonica for another showing.
                              where are you? I should have room for another pair of monsters.
                              "The defintion of Insanity is: doing the same thing over and over again and expecting different results." Albert Einstein

                              Comment


                              • #90
                                Re: I know it is early, but.... InDIYana??

                                Originally posted by mike15 View Post
                                where are you? I should have room for another pair of monsters.
                                Nearly Wisconsin, a few minutes west of I94. Think Great America (6 flags).
                                diVine Audio

                                Comment

                                Working...
                                X