New Project: The Jonquils (RS150P-8 + SB26STNC)

[PWR RYD]

I have not heard the newer /A version but if it sounds like the original I think it would make a very nice sounding midrange with a larger woofer (10-12").

[Dance]

Hi.
What do you think about RS150P-8/A for three way? How good is RS150P-8 as a midrange?

[ani_101]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

I have all those files. PM your email addy

PM sent

[PWR RYD]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

I have all those files. PM your email addy

[Mike220]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

You've got mail! Np.

[ani_101]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

PM sent.

Thanks Mike

[Mike220]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

Pm me your email address. I have the tweeter frd and impedance measurements. I dont have the t/s params we used Craigs pc for dats.

[ani_101]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

Hi Craig

Do oyu have the measured TS parameters of the RS150p and the SB?

FRD and ZMA plots would also be nice.

if you do, could you kindly post them or send me a PM.

Thanks
Ani

[PWR RYD]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

Final Schematic:

[PWR RYD]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

Oh crap! I forgot to post the final schematic. I'll put that up as soon as I can.

PM me your email address and I can send you info on the RUshers.

[bullittstang]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

Craig,
Any chance you're going to post the final XO design? I see where you posted the tweeter section, but can't find your final XO for the woofer section.

Also, did you do a build thread on your "RUshers", those are some very nice looking speakers.

Paul

[Derekj]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

I was playing around in PCD today to try and get rid of that dip at 3k on my Iron Driver speaker (same tweeter and same baffle width). Will try your combo of values to see if it make it a bit better than what I came up with - thanks!

[Audiotorium]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

Those are big caps!
Thanks for posting this.

[PWR RYD]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

Here's how I took care of it:

[Audiotorium]

Re: New Project: The Jonquils (RS150P-8 + SB26STNC)

Cool, thanks.