Scan-Speek 4" for 49 cents?

[jbruner]

Re: Scan-Speek 4" for 49 cents?

There isn't much copper in a penny these days :p

It was a 1963 penny. The 2011 penny achieved a 10k Le of .216
Anything before 1982 is good.

[jbruner]

Re: Scan-Speek 4" for 49 cents?

yeah. get a brass or copper washer

When I need a copper washer, I hammer a penny to the right size and drill a hole in the center. Much cheaper.

[Æ]

Re: Scan-Speek 4" for 49 cents?

Alternate thread title: I'm a cutter now!

I've been trying out driver modifications on some old NSBs.

I like what you did, experimentation and hardly expensive or risky at that.

[fatmarley]

Re: Scan-Speek 4" for 49 cents?

Shame the copper penny didn't do much. THIS guy used a short length of copper pipe (scroll down).

[caleb]

Re: Scan-Speek 4" for 49 cents?

Part Express linked to this thread on their facebook page. Hey maybe they could send jbruner some free drivers so he can improve them with slits and document the work and improvements. I mean something like oh I don't know say a pair of Dayton Audio PM180-8 6-1/2" :D

[jbruner]

Re: Scan-Speek 4" for 49 cents?

You are in luck. The NS6 is next on the execution list.

blasphemy

While I thoroughly enjoy your provocative one-word comments, I have no idea what you mean by this.

The Aurasound NS6 sounds so whoreible, there's no way I can make it worse.

The only question is, should I start a new thread for the NS6-255-8A?

4 drivers have been baselined.


Sample 3 has been cut.

[Tin_Ears]

Re: Scan-Speek 4" for 49 cents?

I'd suggest you start a new thread and edit your OP to include a link (or links) to test(s) of different drivers. In the OP of your new thread(s) include links to this one and all others. This is "probably" the least confusing method although many folks will cross-post in this and other threads regarding the various drivers. It'll take some diligence to keep your threads on track. Oh my... what have you gotten yourself into??:eek::D

[killa]

Re: Scan-Speek 4" for 49 cents?

The Aurasound NS6 sounds so whoreible, t

.

Maybe you could pimp them out :p Nice cutting btw.

[Tin_Ears]

Re: Scan-Speek 4" for 49 cents?

Maybe you could pimp them out :p Nice cutting btw.

Yeah... was it intentional, ya' think? Maybe he needs to consider adding more slutz in the cones?:D

[filmslayer]

Re: Scan-Speek 4" for 49 cents?

Nice cutting btw.

i agree ! i cut window film with a razor knife for a living and don't think i could cut that straight and symmetrical ...

[killa]

Re: Scan-Speek 4" for 49 cents?

With that many slits he could make a fortune

[caleb]

Re: Scan-Speek 4" for 49 cents?

Maybe you could pimp them out :p Nice cutting btw.

I think he tried to pimp them but they kept talking noise like a NS6, so as we now know, sometimes you have to cut a NS6 :eek:

[Tin_Ears]

Re: Scan-Speek 4" for 49 cents?

With that many slits he could make a fortune

Yeah, but could he put up with all the noise without going insane?

[fatmarley]

Re: Scan-Speek 4" for 49 cents?

[Tin_Ears]

Re: Scan-Speek 4" for 49 cents?

jbruner... I hope you're not offended. We're just playin'. :D