Tweet
Re: OS Boombox build
Hate finish work.
Hate finish work.
-
Builds - C-Killa - Speedsters - LithMTM - Talking Sticks - Pocket Rockets - Khanspires - Dayton RS Center - RS225/28A - Kairos - Adelphos - SEOS TD12X - Dayton 8 - Needles - 871S - eD6c - Overnight Sensations - Tritrix (ported) - Lineup F4 - Stentorians - The Cheapies - Tub Thumpers - Barbells - Tuba HT - Numerous subwoofers - probably missing a few...... :p -
Re: OS Boombox build
me too . more and more by the minute ! i was done , clear was drying and it looked good (see pics above ) . boss was just to effing lazy to move it ....Originally posted by joeybutts View PostComment
-
Re: OS Boombox build
box should be salvageable , 2nd coat of primer stuck and did not crack . she's sanded smooth and ready for paint . i'm off to the parts store for another $50 in paint and clear , joy ....
Comment
-
-
Re: OS Boombox build
no , he said " well i didn't think saw dust would hit it ." it was less than 2 foot away from the saw ....Originally posted by Dewmiester View PostComment
-
-
Re: OS Boombox build
i took no chances yesterday and brought this home , damn my house smells like a paint booth ....Comment
-
Re: OS Boombox build
I remember when I lived in my apartment and would do all my wood working on my 2nd story balcony. I had MDF smell and dust EVERYWHERE in that apartment as well as paint. I would plastic tarp in the whole balcony. It is quite a memory I have of that place.
MEmories.....
The blue is looking good!Builds - C-Killa - Speedsters - LithMTM - Talking Sticks - Pocket Rockets - Khanspires - Dayton RS Center - RS225/28A - Kairos - Adelphos - SEOS TD12X - Dayton 8 - Needles - 871S - eD6c - Overnight Sensations - Tritrix (ported) - Lineup F4 - Stentorians - The Cheapies - Tub Thumpers - Barbells - Tuba HT - Numerous subwoofers - probably missing a few...... :pComment
-
Re: OS Boombox build
a guy i work with truck was the color inspiration . with all the chrome hardware i think i nailed it ...
Comment
-
Re: OS Boombox build
back at it and getting close . needed to touch up the 3/4" that frames the back , got a little heavy handed sanding and now re-painting that . to quote Joeybutts , " i HATE finish work" ....
the baffle and top look really good though ...
Comment
-
Re: OS Boombox build
Bwahhaha. Patience is not my best virtue.....looking good!Builds - C-Killa - Speedsters - LithMTM - Talking Sticks - Pocket Rockets - Khanspires - Dayton RS Center - RS225/28A - Kairos - Adelphos - SEOS TD12X - Dayton 8 - Needles - 871S - eD6c - Overnight Sensations - Tritrix (ported) - Lineup F4 - Stentorians - The Cheapies - Tub Thumpers - Barbells - Tuba HT - Numerous subwoofers - probably missing a few...... :pComment
-
Re: OS Boombox build
i'm learning not one of mine either ... thankfully i had just enough paint and clear to git-r-done ...Originally posted by joeybutts View PostComment
-
Re: OS Boombox build
<SIGH> 9 days of curing wasn't enough . the news paper i used to mask it off stuck and i am gonna have to re-do it one more time . i'm sick to my stomach rite now ...
Comment
-
Re: OS Boombox build
Something isn't right there. Most of these paints shouldn't need more than an hour or so to be set enough to mask. How long did you leave the masking on and did you overspray on the paper enough to get it wet. It may have been the fresh paint you were spraying that got the paper wet and made it stick. I prefer to use the brown masking paper that you can get in the paint department at most home improvement stores. It's thicker and less apt to allow overspray to bleed through. Also try to mask, spray and then remove masking as soon as possible. Don't leave the masking on for long periods of time. I typically remove the masking within 30 minutes of spraying.Comment
-
Re: OS Boombox build
masking was on a little over an hour after spraying . no the paper didn't get that much on it , even the baffle on the other side had paper stick ... i don't know ...Comment
Comment