Tweet
Re: RS-P WWMTM 3 Way underway ( pic heavy )
got to town (slow at work) and got a 4' x 4' piece of pegboard . wasn't bad , $12 ...
got to town (slow at work) and got a 4' x 4' piece of pegboard . wasn't bad , $12 ...
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
anyone see any glaring issues before i start soldering ?
Last edited by filmslayer; 06-28-2018, 01:44 PM.Comment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
no idea as far as correct. As far as aesthetics, I would have pulled the leads through the pegboard and connected all underneath...like so -
Builds - C-Killa - Speedsters - LithMTM - Talking Sticks - Pocket Rockets - Khanspires - Dayton RS Center - RS225/28A - Kairos - Adelphos - SEOS TD12X - Dayton 8 - Needles - 871S - eD6c - Overnight Sensations - Tritrix (ported) - Lineup F4 - Stentorians - The Cheapies - Tub Thumpers - Barbells - Tuba HT - Numerous subwoofers - probably missing a few...... :pComment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
hmmm ...
this will probably be the last time its seen . i'm just worried about it working right ...
inductor spacing is good though ?Comment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
Are you going to solder it?Originally posted by filmslayer View PostComment
-
Comment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
looks good to meBuilds - C-Killa - Speedsters - LithMTM - Talking Sticks - Pocket Rockets - Khanspires - Dayton RS Center - RS225/28A - Kairos - Adelphos - SEOS TD12X - Dayton 8 - Needles - 871S - eD6c - Overnight Sensations - Tritrix (ported) - Lineup F4 - Stentorians - The Cheapies - Tub Thumpers - Barbells - Tuba HT - Numerous subwoofers - probably missing a few...... :pComment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
it ain't pretty but i am confident its right ... almost got the first one done .Comment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
like i said , not pretty ...
Last edited by filmslayer; 06-28-2018, 01:45 PM.Comment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
bwhahhahaha. thankfully it goes IN the cabinet. :pBuilds - C-Killa - Speedsters - LithMTM - Talking Sticks - Pocket Rockets - Khanspires - Dayton RS Center - RS225/28A - Kairos - Adelphos - SEOS TD12X - Dayton 8 - Needles - 871S - eD6c - Overnight Sensations - Tritrix (ported) - Lineup F4 - Stentorians - The Cheapies - Tub Thumpers - Barbells - Tuba HT - Numerous subwoofers - probably missing a few...... :pComment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
thats what i'm screaming !Comment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
Now get us some more pics of the finished cabs!!!!! CHEEZE, this guy..... :pBuilds - C-Killa - Speedsters - LithMTM - Talking Sticks - Pocket Rockets - Khanspires - Dayton RS Center - RS225/28A - Kairos - Adelphos - SEOS TD12X - Dayton 8 - Needles - 871S - eD6c - Overnight Sensations - Tritrix (ported) - Lineup F4 - Stentorians - The Cheapies - Tub Thumpers - Barbells - Tuba HT - Numerous subwoofers - probably missing a few...... :pComment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
yeah,yeah,yeah ... i hear ya !
first cold front of the season is coming through this weekend , temp and humidity will be a whole lot better for doing work outside ... that said it will still probably be another month before their finished ...Comment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
I think I see several errors, but I'm not sure due to camera angles, and all the stuff behind the board making things hard to see. Is anything connected on the back side? Was the first pictured x-over supposed to be finished?Originally posted by filmslayer View PostComment
-
Re: RS-P WWMTM 3 Way underway ( pic heavy )
no , 1st pic was just asking about inductor spacing . the 2nd one was pretty much finished minus the 3 ohm resister that came in the mail shortly after . here it is now sitting on top of the speaker in use and sounds fine ...
what it is it you thought you saw ?Last edited by filmslayer; 07-31-2017, 08:09 PM.Comment
Comment