RS-P WWMTM 3 Way underway ( pic heavy )

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

with a couple day listening to the new changes i'm not convinced i like them . i do like how the zobel has cleaned up the upper bass but i believe padding the mids has changed the overall balance of the speaker . i did however go outside for a pic before i go back on the mid change ..
raw driver on axis from 3ft with THD ...

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

here it is minus the mid padding and likely to be the final tweak...




and 45* left ...

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

so , yesterday i as putting these through what i'd hope to be the final tests and low and behold at full volume with certain materiel i saw and heard the excursion that Josh seen in his version . i have since added back in the mid changes , changing to 1.1mH and adding 30ohms across post XO ... i think Josh may be getting tired of drawing me schematics ... :o

[Thumper Tom]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

being slow at work is both good and bad ... got one done and my "not so pretty" XO is now down rite fugly ... :eek:

What is the bundle of yellow caps? I have seen these used a couple times in different builds and wanted to know if I was missing something great or you guys got 60 of them on buyout for 5 bucks.

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

they are buy out caps that Josh supplied . compared to the cost of the 75uF you may have missed out ....

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

just got the last piece of the puzzle , feet . i gotta thank Wolf for the suggestion from another thread , 1 7/8 polished aluminum trailer hitch ba!!s . i got them at a local hardware supply for $4 apiece ...





now i just gotta get off my azz and finish these ...

[joeybutts]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

now i just gotta get off my azz and finish these ...

Hardest part for me to do as well.

What a cool idea for the feet. Interested in seeing how they turn out.

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

i think its gonna look really good under the black Duratex .

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

UT-OH ! someone found a lil motivation this morning ...

[joeybutts]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

awwwww yeahhhhhhhh. What is that you are using?

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

Duratex website recommends spackle and not bondo . it is pink DAP that dries white when ready to sand ...

[greywarden]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

That's what I used on the Leviathan towers and a year later there are zero traces of the b*utt joints.

[mattk]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

being slow at work is both good and bad ... got one done and my "not so pretty" XO is now down rite fugly ... :eek:

Just trying to imagine what TSA's reaction would be if you had these in a carry-on bag.

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

Just trying to imagine what TSA's reaction would be if you had these in a carry-on bag.

LOL !!! i got two of these in the mail ... we're not sure how they got through ...

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )