RS-P WWMTM 3 Way underway ( pic heavy )

[joeybutts]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

Ballin'. :D

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

Bwahahaha ... the paper towers are ballin !

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

hey Joey , i think we just named them ... the Ballin' Paper Towers ...

what say you ?

[joeybutts]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

Close.....doesn't flow well for me....BTP's.....Ballin' Towers of Paper?

Hmmm....not quite there..... of course they are your design....call them what you will.

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

i'm stuck on Paper Towers ... i'm just not witty like that ... i do like BPT's ...

[joeybutts]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

Wide Rules?

Paper Wads?

Spit [email protected]$?

Ballin on 20lbs?

Ballin Reams?

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

huh ???

[joeybutts]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

name ideas.

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

OK ... anyway the plan is to have these finished by tuesday . i'll get this one prepped today and do the other tomorrow . sunday will be the 1st coat and monday the 2nd and back together tuesday ... just in time for my B-day witch is friday ...

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

damn , looks like i picked the wrong weekend to find some motivation . gonna be near freezing and the wind blowing 30mph ...

[greywarden]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

Same weather here, it's gross and wet and cold out there.

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

i got them both prepped minus a lil more sanding witch i should get done before the sun goes down . we'll see if it warms enough tomorrow afternoon to roll the first coat on ....

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

its looking good ! found a lil nook in the sun outta the wind and the first coat is almost dry already. gonna put on the 2nd coat after lunch and hopefully have them back together tomorrow ...

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

man this stuff goes a long way !

i shaved that glob upper right corner of right speaker before the second coat and i think i have no lines after 3 coats . i still have a bit left over in case of touch ups after assembly ... also instead of using a Sharpie i hit the mtm rebates with some flat black spray paint before i started ...