Announcement

Collapse
No announcement yet.

RS-P WWMTM 3 Way underway ( pic heavy )

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: RS-P WWMTM 3 Way underway ( pic heavy )

    this is becoming frustrating ! UMM-6 is still not giving multi-colors . but i did find a box this morning that i un-checked when looking for something specific and i think that might be it , will see tonight . i did get some whole speaker measurements that showed me what i was looking for , the 3ohm padding on the tweet ...

    raw driver






    and here it is gated ...


    Last edited by filmslayer; 07-31-2017, 08:58 PM.
    Paper Towers
    RS180P/28F surrounds
    Boombox

    Comment


    • Re: RS-P WWMTM 3 Way underway ( pic heavy )

      The colors don't really matter so much as being able to see several measurements at the same time. If you uncheck the measurement signal box, it will take the measurement signal line off the chart. You can get a better view of the measurement by using your mouse, and selecting a smaller area of the graph. The graph then expands to fill the screen. If you don't like the change, right click on it, and it goes back to the previous size.

      Comment


      • Re: RS-P WWMTM 3 Way underway ( pic heavy )

        i understand what your saying and i get what i need from the graphs i've posted . it would be nice to get some nice pretty multi-colored graph for everyone else tho ...
        Paper Towers
        RS180P/28F surrounds
        Boombox

        Comment


        • Re: RS-P WWMTM 3 Way underway ( pic heavy )

          got the second box together today , will do cut outs for port and binding post as well as cut and attach the baffle tomorrow ...





          Last edited by filmslayer; 06-28-2018, 02:05 PM.
          Paper Towers
          RS180P/28F surrounds
          Boombox

          Comment


          • Re: RS-P WWMTM 3 Way underway ( pic heavy )

            damn guys !!! i jacked up the 2nd baffle , i'm so ****** at myself rite now !!!

            i measured 3 times and was still off . the spacing is off just a tic and i had to use bondo to fill in . what y'all think ??? run with it or scrap it and cut another baffle ?







            Last edited by filmslayer; 07-31-2017, 09:01 PM.
            Paper Towers
            RS180P/28F surrounds
            Boombox

            Comment


            • Re: RS-P WWMTM 3 Way underway ( pic heavy )

              Originally posted by filmslayer View Post
              damn guys !!! i jacked up the 2nd baffle , i'm so ****** at myself rite now !!!

              i measured 3 times and was still off . the spacing is off just a tic and i had to use bondo to fill in . what y'all think ??? run with it or scrap it and cut another baffle ?
              I would live with it, then Duratex the crap out of the front baffle so that nobody notices. The texture hides flaws nicely.
              Best Regards,

              Rory Buszka
              Product Manager, Dayton Audio

              The best way to predict the future is to create it.

              Comment


              • Re: RS-P WWMTM 3 Way underway ( pic heavy )

                Originally posted by [email protected] View Post
                I would live with it, then Duratex the crap out of the front baffle so that nobody notices. The texture hides flaws nicely.
                i'm leaning that way too Rory , but the apcing i'm referring to is one speaker to another . 1st one i got 1/8" between drivers , 2nd one much less ...
                Paper Towers
                RS180P/28F surrounds
                Boombox

                Comment


                • Re: RS-P WWMTM 3 Way underway ( pic heavy )

                  Originally posted by filmslayer View Post
                  i'm leaning that way too Rory , but the apcing i'm referring to is one speaker to another . 1st one i got 1/8" between drivers , 2nd one much less ...
                  Your driver spacing needs to match (left and right speakers) or your crossover phasing will be different and probably noticeable.
                  DARPA Jr - 2015 InDIYana Winner - RS180-8 + RS100P-8 + ND25FA
                  The Aria's - RS150-4 (or RS150-8) + XT25SC90
                  The Mariposa's - TEBM65C20F-8 + ND16FA
                  The Canzonetta's - RS100P-8 and ND16FA
                  AudioSource AMP-100 Mods OR Pyle PAMP1000 Mods

                  Comment


                  • Re: RS-P WWMTM 3 Way underway ( pic heavy )

                    Originally posted by tyger23 View Post
                    Your driver spacing needs to match (left and right speakers) or your crossover phasing will be different and probably noticeable.
                    Check that - how much different will the two be? If your talking 1/16 or so, then you can live with it as long as your visual appearance is acceptable to you.
                    DARPA Jr - 2015 InDIYana Winner - RS180-8 + RS100P-8 + ND25FA
                    The Aria's - RS150-4 (or RS150-8) + XT25SC90
                    The Mariposa's - TEBM65C20F-8 + ND16FA
                    The Canzonetta's - RS100P-8 and ND16FA
                    AudioSource AMP-100 Mods OR Pyle PAMP1000 Mods

                    Comment


                    • Re: RS-P WWMTM 3 Way underway ( pic heavy )

                      Originally posted by tyger23 View Post
                      Check that - how much different will the two be? If your talking 1/16 or so, then you can live with it as long as your visual appearance is acceptable to you.
                      its not enough to be audible in the sound , more of i have to look at it every day kinda thing ...

                      i went ahead and finished this baffle , back cuts and all . gonna set it aside and chew on what i want to do .

                      for now more voicing , we're splitting hairs rite now between 3ohm and 2.5ohm on the tweeter circuit ....
                      Paper Towers
                      RS180P/28F surrounds
                      Boombox

                      Comment


                      • Re: RS-P WWMTM 3 Way underway ( pic heavy )

                        Nice build! I'd go with 2.718 ohms on the tweeter padding :D

                        Comment


                        • Re: RS-P WWMTM 3 Way underway ( pic heavy )

                          Originally posted by Blenton View Post
                          I'd go with 2.718 ohms on the tweeter padding :D
                          thanks for recommendation , will give it a listen ... ;)

                          i got 2.5 on it now and really liking it . its very well balanced .

                          i am also looking at the jacked up baffle and think i may be able to live with . tonight i'm gonna load the drivers and set it in place and have a good look . at this point it would be another $10-$15 and 3 hours more work . i think this build may deserve it , they are going to be really good ...
                          Paper Towers
                          RS180P/28F surrounds
                          Boombox

                          Comment


                          • Re: RS-P WWMTM 3 Way underway ( pic heavy )

                            Originally posted by filmslayer View Post
                            this is becoming frustrating ! UMM-6 is still not giving multi-colors . but i did find a box this morning that i un-checked when looking for something specific and i think that might be it , will see tonight . i did get some whole speaker measurements that showed me what i was looking for , the 3ohm padding on the tweet ...

                            raw driver






                            and here it is gated ...


                            Looks like you are getting a little noise in the measurement starting at the 90cm mark. It will probably just make the response slightly rougher but it is easy enough to play with the gate and see how much it is affecting response.

                            Comment


                            • Re: RS-P WWMTM 3 Way underway ( pic heavy )

                              and may still be there . i am measuring in a very small cluttered space . we got it really close with the measurements , now its about what my ear wants ...
                              Paper Towers
                              RS180P/28F surrounds
                              Boombox

                              Comment


                              • Re: RS-P WWMTM 3 Way underway ( pic heavy )

                                Originally posted by filmslayer View Post
                                and may still be there . i am measuring in a very small cluttered space . we got it really close with the measurements , now its about what my ear wants ...

                                It may not be a problem. A little noise will not affect the response too much.

                                Comment

                                Working...
                                X