RS-P WWMTM 3 Way underway ( pic heavy )

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

a little closer guys , XO #2 done ...




now all i need is to get my feet then i can break them down and start finishing ...

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

bunch of pics Tom ... but i think this one is back on page 7 ... ya just gotta picture two of them in black .




getting the 2nd XO together now ...

[Thumper Tom]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

Still no pics, come on with the anticipation

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

really enjoying these today ... kicked back in the lazy-boy 6 feet in front of them , when i close my eyes this guy is what i see ... lol

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

ok , everything is pretty tight but i'll double check , gonna grab the glue gun anyway as i still need to get the second one together this weekend ...

also gonna get to the flea-market and see if i can find a good deal on 8 chrome trailer hitch ba!!s for use for feet . i'd hate to order them online as shipping would be high ...

[rpb]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

at present they are just zip tied but i think i'll bring the hot glue gun home from work tomorrow , couldn't hurt ...

I've used hot glue before, but prefer not to. The high temperature might cause some damage to a cap. Unless you have something so loose that its flopping around, I wouldn't add glue.

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

at present they are just zip tied but i think i'll bring the hot glue gun home from work tomorrow , couldn't hurt ...

[PWR RYD]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

Are your components only zip tied to the peg board or did you also use a little hot melt glue (not visible) underneath? If no glue I'd be slightly concerned about vibrations.

I like hot melt glue and totally trust it for most any size cap, resistors, and small air core inductors. I only add zip ties for large inductors and mongoid caps

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

. Do the woofer and mid grounds run across the backside of the pegboard, and connect right at the middle of the big cap on the top?

yes

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

yeah your tags are right and i did run some of the grounds underneath . the tweet ground is not attached to the uF bundle just looks like it .

[rpb]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

The unfinished picture threw me. It may be fine, but check this picture that I altered with some tags. Do the woofer and mid grounds run across the backside of the pegboard, and connect right at the middle of the big cap on the top?

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

no , 1st pic was just asking about inductor spacing . the 2nd one was pretty much finished minus the 3 ohm resister that came in the mail shortly after . here it is now sitting on top of the speaker in use and sounds fine ...




what it is it you thought you saw ?

[rpb]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

anyone see any glaring issues before i start soldering ?

I think I see several errors, but I'm not sure due to camera angles, and all the stuff behind the board making things hard to see. Is anything connected on the back side? Was the first pictured x-over supposed to be finished?

[filmslayer]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

yeah,yeah,yeah ... i hear ya !

first cold front of the season is coming through this weekend , temp and humidity will be a whole lot better for doing work outside ... that said it will still probably be another month before their finished ...

[joeybutts]

Re: RS-P WWMTM 3 Way underway ( pic heavy )

Now get us some more pics of the finished cabs!!!!! CHEEZE, this guy..... :p