2014 ky diy

[McJerry]

Re: 2014 ky diy

15th is great. I will be bringing a Junk/Swap table. I have quite a bit of stuff to trade/get rid of. Some drivers,some electronics, and other junk. Hope it will be ok to set it up, otherwise it will stay in the van.

Thanks,
McJerry

[McJerry]

Re: 2014 ky diy

15th is great. I will be bringing a Junk/Swap table. I have quite a bit of stuff to trade/get rid of. Some drivers,some electronics, and other junk. Hope it will be ok to set it up, otherwise it will stay in the van.

Thanks,
McJerry

[tag_]

Re: 2014 ky diy

Jerry,

I will make an effort to have a dual integrator board for you by then

Tim

[tombond]

Re: 2014 ky diy

Jerry, bring whatever you like it makes it more fun. Everyone is welcome to bring items to sell or swap.

[McJerry]

Re: 2014 ky diy

Looking forward to it!!

Thanks !

mcJerry

[6thplanet]

Re: 2014 ky diy

I'm in contact with tag_ (Tim) about the U of L sites. I'll post up when I go check them out.

[theLinks]

Re: 2014 ky diy

I'm in contact with tag_ (Tim) about the U of L sites. I'll post up when I go check them out.

Eric
If you need any inside help, from a friend, brother, x to help secure a venue , let me know. Can't promise but I will pull those loose strings if needed. Can't hurt to ask. ;)
Tim

[mikec]

Re: 2014 ky diy

If anyone wants some of the sink cutouts (~20x30 formica) or 12"x60" Baltic Birch drops (grain across short length) let me know and I can bring plenty.

BB is $4 each, cutouts $1 each (no color matching, sorry)

[Wolf]

Re: 2014 ky diy

If anyone wants some of the sink cutouts (~20x30 formica) or 12"x60" Baltic Birch drops (grain across short length) let me know and I can bring plenty.

BB is $4 each, cutouts $1 each (no color matching, sorry)

I'll look at the sink cutouts....
Missed ya at MWAF,
Wolf

[6thplanet]

Re: 2014 ky diy

Alright folks mark your calendars:
Ky-DIY
NOVEMBER 15th
Firstbuild studio
333 East Brandeis Ave.
Louisville, KY 40208
It's located off of I65 by the U of L campus area. It has pretty easy access to the expressway and there's a hotel close by for anyone wishing to show up Friday or stay over till Sunday. Doors open at 9:00am and we can pretty much stay as long as we like, within reason of course. The area we'll be in is very open and has concrete floors. I'll have some carpet to lay down, but would like to know if anyone that plans to come has anything we can use as wall/side treatments. I'm open to any ideas on that. As other pieces fall into place, I'll keep you all informed.

[theLinks]

Re: 2014 ky diy

I plan to be there, so I can bring some 2 x 4 Roxul sound panels if you want. I plan to be there on Friday and leaving on Sunday. You remember my Bro. Lives right there.
Tim

[6thplanet]

Re: 2014 ky diy

By all means, Tim, if its not an inconvenience, bring'um! Thanks
I'm guessing Rory will provide the sound equipment as he has in past events, so if you read this Rory, can you confirm this?

[Wolf]

Re: 2014 ky diy

By all means, Tim, if its not an inconvenience, bring'um! Thanks
I'm guessing Rory will provide the sound equipment as he has in past events, so if you read this Rory, can you confirm this?

I'll bring the Drivecore 2000.
Wolf

[6thplanet]

Re: 2014 ky diy

That's cool, thanks Ben. Right now depending on the amount of enteries, we'll do the 5 and 5 deal with each set of speakers. Adam is coming up with the 5 minute "house mix" then the other 5~6 minute set is user choice.

[Wolf]

Re: 2014 ky diy

That's cool, thanks Ben. Right now depending on the amount of enteries, we'll do the 5 and 5 deal with each set of speakers. Adam is coming up with the 5 minute "house mix" then the other 5~6 minute set is user choice.

I'll be sure to get something together then...
Wolf