Big Radius 2-way

[[email protected]]

Re: Big Radius 2-way

Thanks Chuck. I won the um12 at Dakota last year , will have to buy one someday and came into two knockdown pe 1.25 boxes. Should work ok?

[isaeagle4031]

Re: Big Radius 2-way

Nice work! Anyway I can help with that UM12 let me know.

[[email protected]]

Re: Big Radius 2-way

Am anticipating putting a Ultimax 12 under them. Inspired by Chucks latest builds. We'll see. This just may be the wrong radius for a "small" speaker, but its what I have. Won't really be able to judge them till I get sides on. For my tower build I may just buy a couple of sheets of bendy mdf. Would need three layers of 1/4.
BIG!!!

[Jay1]

Re: Big Radius 2-way

very cool! There wont be any drinks being set on top of those speakers.

[martyh]

Re: Big Radius 2-way

Are you going to add a sub? Those PS180's don't really go too deep, do they?

Looking forward to seeing them this Spring!

[[email protected]]

Re: Big Radius 2-way

I decided to use Gorilla glue. In retrospect, I wish I would have used PL Premium.


This one is awaiting side while the second one is started. They are going to be really big.
Hey, Its a hobby, right?

[[email protected]]

Re: Big Radius 2-way

Also going to give Kerfing a shot.



Here, I sprayed the surface and flooded the bottom of the kerfs with water and after 30 secs poured it out and began training the mdf.

[[email protected]]

Picked up a piece of 3" radius mdf in anticipation for my spring build. Thought I would let the PS180 have another go, this time with the North D25.