Announcement

Collapse
No announcement yet.

Are you man enough to fill this hole?

Collapse
X
Collapse
 
  • Page of 4
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 template Next
  • #1

    Are you man enough to fill this hole?

    Sorry couldn't resist the click bait when such fell out of magazines instead of popping up on your computer.


    Seriously, I haven't given up just wondering what you would put there, knowing its all backasswards and design should start with the midrange? Tweeter is the Viawave, woofer the AE12h.
    Attached Files
    Tags: empty bass hole
  • #2
    Re: Are you man enough to fill this hole?

    Here you go: https://www.madisoundspeakerstore.co...nge-neodymium/
    "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche

    http://www.diy-ny.com/

    Comment

    • #3
      Re: Are you man enough to fill this hole?

      Originally posted by Face View Post
      Here you go: https://www.madisoundspeakerstore.co...nge-neodymium/
      Question is am I man enough to tell my wife I just doubled the budget for this moderately expensive build.

      Comment

      • #4
        Re: Are you man enough to fill this hole?

        Is there a paper mid in 90db sensitivity with clean CSD 300 to 3000?
        http://www.diy-ny.com/

        Comment

        • #5
          Re: Are you man enough to fill this hole?

          I like this one:https://www.madisoundspeakerstore.co...-5.5-midrange/
          Kenny

          http://www.diy-ny.com/
          DIY NY/NJ 2014 https://www.youtube.com/watch?v=FGwA...ature=youtu.be
          Man does not live by measurements alone, a little music helps.

          Comment

          • #6
            Re: Are you man enough to fill this hole?

            Originally posted by r-carpenter View Post
            Is there a paper mid in 90db sensitivity with clean CSD 300 to 3000?
            Its all active so sensitivity not that important apart from my current electronics. Both woofer and tweeter about 93-94dB/2.83V.

            Comment

            • #7
              Re: Are you man enough to fill this hole?

              Originally posted by kenny_k View Post
              I like this one:https://www.madisoundspeakerstore.co...-5.5-midrange/
              On the list.

              Comment

              • #8
                Re: Are you man enough to fill this hole?

                going to measure this guy
                Satori MW13P Black Egyptian Reed Cone Woofer
                https://www.madisoundspeakerstore.com/approx-5-woofers/satori-mw13p-8-5-egyptian-papyrus-cone-woofer-8-ohm/
                Satori MW13P Black Egyptian Reed Cone Woofer

                this coming weekend.
                http://www.diy-ny.com/

                Comment

                • #9
                  Re: Are you man enough to fill this hole?

                  Originally posted by r-carpenter View Post
                  going to measure this guy
                  Satori MW13P Black Egyptian Reed Cone Woofer
                  https://www.madisoundspeakerstore.com/approx-5-woofers/satori-mw13p-8-5-egyptian-papyrus-cone-woofer-8-ohm/
                  Satori MW13P Black Egyptian Reed Cone Woofer

                  this coming weekend.
                  That my friend I very much look forward to.

                  Comment

                  • #10
                    Re: Are you man enough to fill this hole?

                    Jantzen JA 8008
                    Mongo only pawn in game of life
                    ____
                    Ed

                    Comment

                    • #11
                      Re: Are you man enough to fill this hole?

                      Any feedback/user reports on this?

                      Scanspeak 15M/4624G Discovery, 5.25" Midrange
                      https://www.madisoundspeakerstore.com/approx-5-midrange/scanspeak-15m/4624g-discovery-5.25-midrange/
                      Scan-Speak Discovery 15M/4624G-00 5.5" Midrange in 4 ohms. The Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements - plus a wealth of technical features and finesses - gives our customers the possibility of acquiring a tailor-made Scan-Speak solution with very good performance at a reasonable low price point!
                      "Not a Speaker Designer - Not even on the Internet"
                      “Pride is your greatest enemy, humility is your greatest friend.”
                      "If the freedom of speech is taken away, then dumb and silent we may be led, like sheep to the slaughter."

                      Comment

                      • #12
                        Re: Are you man enough to fill this hole?

                        Originally posted by JRS View Post
                        That my friend I very much look forward to.
                        I'll post the info. As you know, it'll be a mate to my viawave but only a two way for now. Thinking a wide baffle with leather/rosewood combo. may be throw in some bronze accents.
                        http://www.diy-ny.com/

                        Comment

                        • #13
                          Re: Are you man enough to fill this hole?

                          In addition to the suggestions above.

                          Zaph Audio ZA14W08 5" Aluminum Cone Mid/Woofer
                          https://www.madisoundspeakerstore.com/approx-5-woofers/zaph-audio-za14w08-5-aluminum-cone-mid/woofer/
                          Next batch of ZA14 woofers due to arrive in late-Jan/Feb, 2023. Email us ([email protected]) if you would like to be notified when they are back in stock.Zaph Audio ZA14W08 5" Aluminum Cone Woofer Visit the ZA5 Family of Speaker Kits using this driver. Strategically placed Faraday rings in the motor allow for low non-linear distortion and limited inductance change through the voice coil's range of travel. A formed aluminum alloy cone provides very flat response within its passband and a breakup node that is high in frequency for extended usable bandwidth. Machined aluminum phase plug eliminates compression and reflection that would normally occur under a dustcap and promotes cooling of the voice coil. Tinsel leads are mounted to opposite sides of the voice coil former to promote even cone loading. Rigid cast metal frame of an open design includes ventilation under the raised spider. Flat linear spider provides uniform restoring force throughout the voice coil's range of travel. Integrated gasket for airtight seal and vibration resistance. Rubber surround Since its introduciton in 2009, we have sold thousands of ZA14 woofers. Each batch is random sample tested for consistency and performance by Zaph Audio. The track record of this driver is outstanding in regards to reliabliity and tolerance, both within batches and from batch to batch. Nominal Impedance 8 ohm DC Resistance (Re) 7.1 ohm Voice Coil Inductance ([email protected]) 0.37 mH Effective Piston Area (Sd) 68 cm2 Voice Coil Diameter 25.4 mm Voice Coil Height 10.5 mm Voice Coil Layers 2 Air Gap Height 4 mm Linear Coil Travel X-max (p-p) 6.5 mm Magnet Weight 0.44 kg Net Weight 1.10 kg Free Air Resonance 65.8 Hz Sensitivity (2.83V/1m) 87 dB Mechanical Q-factor (Qms) 2.13 Electrical Q-factor (Qes) 0.56 Total Q-factor (Qts) 0.44 Moving Mass (Mms) 7.2 g Force Factor (BL) 6.15 Tm Equivalent Volume (Vas) 5.23 l Compliance (Cms) 0.80 um/N Rated Power Handling 60 Watt Overall diameter 138 mm Cutout diameter 114 mm Flange thickness 4.5 mm Depth 66 mm Bolt Hole Circle at 127mmHole diameter 4mm4 equally spaced holes   Bolt Hole Circle at 127mmHole diameter 4mm4 equally spaced holes


                          Scanspeak 15M/4624G Discovery, 5.25" Midrange
                          https://www.madisoundspeakerstore.com/approx-5-midrange/scanspeak-15m/4624g-discovery-5.25-midrange/
                          Scan-Speak Discovery 15M/4624G-00 5.5" Midrange in 4 ohms. The Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements - plus a wealth of technical features and finesses - gives our customers the possibility of acquiring a tailor-made Scan-Speak solution with very good performance at a reasonable low price point!
                          "He who fights with monsters should look to it that he himself does not become a monster. And when you gaze long into an abyss the abyss also gazes into you." Friedrich Nietzsche

                          http://www.diy-ny.com/

                          Comment

                          • #14
                            Re: Are you man enough to fill this hole?

                            Titanium Visaton is also worth mentioning.
                            http://www.diy-ny.com/

                            Comment

                            • #15
                              Re: Are you man enough to fill this hole?

                              Originally posted by edlafontaine View Post
                              Jantzen JA 8008
                              That's an interesting call and on the advice of someone else here, I looked hard and deep and even corresponded with Troels about it. At the time I was intrigued as there is that paper sound and almost committed.

                              I have almost committed several times--I didn't pull the trigger on account of so much advice that the off axis response would fall apart before I could reach the tweeter, even using brick wall digital filters.

                              Comment

                              Previous 1 2 3 4 template Next
                              Working...
                              X