jimbones
Senior Member
Last Activity: Yesterday, 07:51 PM
Joined: 06-09-2012
Location: NY
-
Update: I am working on the details in the drawings and at the same time trying to locate a cabinet builder. Most dont like doing stuff like this so I... -
Sold!!Leave a comment:
-
I agree....Leave a comment:
-
yes there will be footers so that is why I have them at 36. allow 3 inches for stuff and brings it up to ear level and still have another inch to 40Leave a comment:
-
rpb this may help. I can alway make it shorter and adjust the dimensions to maintain internal volume...
Leave a comment:
-
rpb correct, so there will be about 4 inches of space above tweeter....Leave a comment:
-
I can locate the tweeter 36-39 inches off the floor. Note that in my listening chair my ears are 39 inches from the floor. -
Peerless by Tymphany 830883 6-1/2" Nomex Cone HDS Woofer
Pair of 830883 6-1/2" Nomex Cone HDS Woofer in great condition. $65pr plus shipping. PM me for pictures.... -
a4eaudio, note that the front is wide and the back is narrow so it is a trap standing up. -
This is the basic overall shape/size of my speaker. It's a trap but I dont have the time/patience for doing curved panels lol. Any major issues? otherwise...
Leave a comment:
-
question regarding vented alignment: Im thinking this is a SBB4 or SC4? Is that right? If not what alignment is this. (If I tune to 32hz it gets flatter...
Leave a comment:
-
Note to all: Previous individual threads addressed driver selection, optimal enclosure size and venting/tuning (70L), and midrange enclosure sizing. I...Leave a comment:
-
Sure will do -
lol, ok let me clarify as I may not have been clear. I have existing boxes that I am using for the mids. the tweeter is mounted on a bracket above it....Leave a comment:
-
yea I added them but the macros are still disabled. I think it is a security setting. grrrrrr.
Wolf I adjusted the design for drivers to...Leave a comment:
-
Wolf I say 250-285hz because that is where the baffle step occurs. I usually try to design around that since I dont have build extra circuitry. so it...Leave a comment:
-
Trying to figure out how to enable macros on my PCD. I usually compare my values to the auto calculate. Anyone know how to enable the macros? I tried...Leave a comment:
-
The only reason I used 3.3k is because I have tried using the mid and tweet in a prototype set up and the tweeter sound better crossed over higher.(tried... -
nothing special other than rounded over. The cabinets will be a trapezoid shape with the narrower part toward the rear. I could put some sound absorbent...
No activity results to display
Leave a comment: