joshshetter
New Member
Last Activity: Today, 07:30 AM
Joined: 09-10-2007
Location:
-
Got them in the studio, I find they sit perfectly with a low shelf of +1db starting at 120hz and I have a high shelf from 3k up at -1db. I was curious... -
Glued together and clamped them over night, put drivers in this morning, just had to hear them. Probably the best mid range I've heard on a speaker. Time...Leave a comment:
-
Gotta go grab more sound barrier stuff tomorrow, but I was wondering if this crossover placement was ok....Leave a comment:
-
Did some measurements today to make sure everything was working right, pretty happy with the results.Leave a comment:
-
That is a heck of a finish procedure, the "finished" result at the end looks quite good though. I don't intend to stain these though. I am... -
Returning the bad DC160.
Does this speaker have a recommended amount of internal stuffing. I've got a good bit of stuffing in there and...Leave a comment:
-
Hmm, probably a bit too high of an f3 for my usage. I'm going to keep the cabinets as is. Just curious what the roll off is on the sealed 8-11 liter...Leave a comment:
-
It's just the cnc'd MDF in the amiga kit. It wouldn't be a even cut in half but cut to whatever size reaches the appropriate volume....Leave a comment:
-
Amiga Build
I've reached a stopping point on my Classix II and have started on some Amiga's. Lovely woofer, tweeter feels quite nice for the cost, very rigid plate...
-
The wood is pine.
I noticed something on my dc160's. One of them has weird bubbled up glue on the basket and magnet and you can move it...Leave a comment:
-
Thanks for the tips, yeah going to try a few options. I've had mostly oil finishes recommend. Today I went to the store and bought a ton of L brackets... -
So this is where I'm stopping with the Classix II for now. The weather is too cold in my shop to do the finish I want, so I'll just wait until things...
Leave a comment:
-
Good tip, thanks! I think I will just use PVC, glue it into the hole then route over the edge. I'll have a lot more confidence with that than the generally...Leave a comment:
-
There's a lot to EQ correction.
Are you employing a slope to the correction?
Are you correcting the entire spectrum or a limited...Leave a comment:
-
Made some good progress on cabinets. Got the edges routed over, but will probably go buy a bit with a steeper round over for the baffle...Leave a comment:
-
Speaking of the Amiga's, I'm on my way to pick up some kits for those. Think I got bit by some DIY bug.Leave a comment:
-
I've ended up purchasing two more kits for these for my studio, there is just something about them that I love. I considered the hitmakers but decided...Leave a comment:
-
My measurements are telling me it's tuned somewhere around ~100-120hz. Pretty terrible spot for a port considering most ceilings are 8ft. Interestingly,...Leave a comment:
-
Thanks for looking guys.
Those old cabinets were ported, but it was a 2"x2" port. I blocked it with foam and that didn't sound...Leave a comment:
-
Classic Classix II's
Howdy, first project I'm sharing here. Nothing particularly exciting.
I was trying to figure out what to do with some dc160's and bc25 tweeters...
No activity results to display
Leave a comment: