01-0077
Been Around Awhile
Last Activity: 05-19-2023, 09:26 PM
Joined: 01-17-2015
Location: Perth, Australia
-
I use EasyEDA to design my boards for the fact that it is free and it creates Gerber files which are then uploaded to jlcpcb for the order process. JLCPCB... -
The screw terminals are manufactured by Dinkle Corporation part number EK950V-02P, pitch of pins is 9.52mm. You can connect two together to form a 4...Leave a comment:
-
For surface finish I went with HASL(with lead), thought it may assist with my soldering efforts.Leave a comment:
-
Hi Steve,
Yes I used JLCPCB to fabricate my boards and this is why I had to use 2oz copper as I am pretty sure this is the maximum they offer....Leave a comment:
-
Hi Unclejunebug,
Here is a pic of two xover pcb's I designed in easyeda/jlcpcb for an Overnight Sensation TMM build. My traces are 7mm (~...Leave a comment:
No activity results to display
Leave a comment: