3rutu5
Seasoned Veteran
Last Activity: Today, 08:26 AM
Joined: 07-12-2018
Location:
-
As the dual voice coil woofer is proving hard to actually model, i was considering using the PACTO design that Visaton currently uses, where they cross...
-
Considering I'm using W 130 X - 2 X 4 OHM as the woofer and it looks like it would be in a 0.13 - 0.14cuft enclosure (ea) and tuned to a F3 in the late...Leave a comment:
-
The imagination is running wild on this, trying to find a spectrum analyzer that's around 300mm long and 40mm high to put at the top, then there was the... -
Design of next project - 3D Print
A while ago i mentioned redesigning an old school Sharp Ghettoblaster. Its been a part time design project whilst i have one of the big printers fixed....
-
well, was giving it a run and looks like ive blown the light.....looks like somebody has forgotten to put on the resistor.....Leave a comment:
-
Lol, I wouldn't... I've been using autocad and other similar programs for my job for more than 20 years, so I have an advantage there. Also I caught the... -
After thoughts...
I know i have no divide, i did model them as a singular enclosure, but realise that i might have some issues with Rad's...Leave a comment:
-
Something to note, Matt filament seems to be quite forgiving, so absolutely no post processing was done, just straight plotted, glued, screwed and assembled....
Leave a comment:
-
Something i've noticed with this full ranger, was the first time i used it, i pushed it too hard, sizing an enclosure to get F3's in the 70-80's. which...
Leave a comment:
-
No real reason apart from i was bored bt speaker project.
WARNING - NOT TO EVERYONES TASTE
i was going through my garage an noticed the big box of parts/speakers etc i had still, which is probably... -
brilliant, ill grab some stainless fittings, and look at that next time. Soldering was a pain onto the cheap terminals/clips and almost melted the 3d...Leave a comment:
-
quite off topic - can you use any bolts from a hardware store....
quite off topic - can you use any bolts from a hardware store as battery terminals on a 3.7-24v project? i saw something interesting to avoid soldering/welding...
-
Something small and something random (CE65-W Build)
Just something little and easy to start off the New Year, one little Bluetooth Dome 3D printed setup, which can remain in its raw form as i dont feel...
-
Just something different I thought I'd bring out... redesigned bigger and to house a Dayton audio CE65 W I had sitting around. Originally going to use...Leave a comment:
-
Yeah lol, I've just wondered if I scaled up one to fit a butchered surround nd65 what would it look like
I thought the nd65 as we All know if doesn't...
Leave a comment:
-
12v BOOZETOOTH WITH ND65-4
Folks, having some issues at the moment getting the bigger 3d printer running, which means my main project is delayed. So in the meantime i decided to...
-
from the front they look like those Peerless GBS series driversLeave a comment:
No activity results to display
Leave a comment: