DrewsBrews
Been Around Awhile
Last Activity: Yesterday, 02:07 PM
Joined: 09-20-2019
Location:
-
Is this Drjay's last post? Haven't seen him around in a while. I hope everything is OK. -
Not sure what is meant by "High compliance"
For tweaking the PHT-409s I'd suggest setting up a cheap LIMP box for ARTA freeware....Leave a comment:
-
The wall mount table thing is what I was referring to. Sounds like it was identified and dealt with in a reasonable manor. -
Heck last year there was an entry that was openly being advertised as a product that the builder was going commercial with, which is directly against...Leave a comment:
-
An easy way to turn off all the potential stuff that could be messing with the signal is to put it in Pure direct mode.
I had a pioneer VSX...Last edited by DrewsBrews; 05-30-2023, 11:41 AM.Leave a comment:
-
Please make your own thread rather than dumping it into someone else's -
The speaker I was thinking of entering would be the one in my avatar. PA310-8 I got on sale for $59ea in 2019, and D220ti for $50ea. So it still would...Leave a comment:
-
In case you are interested. Paudio PHT-409. Knockoff of the tweeters used in the previous few generations of the (lower end?) heritage speakers. Has a...
Leave a comment:
-
2023 Speaker Design Competition
I didn't find a post about it yet so figured I'd start one. Aug 4th, 5th
https://www.parts-express.com/speake...gn-competition
... -
Could trim exact fit pads out of sheet neoprene... If you have a place that supplies computer hardware locally you can often get cheap mouse pads to cut...Leave a comment:
-
Could yield benefits. Mixing materials with different densities is how they do alot of soundproofing. I wouldn't be surprised if it is slightly less ...Leave a comment:
-
The bass bin on Tarkus is slanted to lean back on the front. That along with the forward slant on the back of the M/T enclosure creates an optical i... -
Yep this was the first thing that came to mind for me. If the woofer is wired reverse from what is correct it will cause the drivers to cancel each other... -
Ok so you didn't want the option to do either config in one circuit, just generally want a crossover for two CDs. I understand now.
I'd agree...Last edited by DrewsBrews; 05-23-2023, 11:21 AM.Leave a comment:
-
Leave a comment:
-
Yeah well, just trying to offer a potential solution to the question asked. It is up to them to decide if it is worth it. -
I have used a DPDT switch and two different input connections to switch between two different circuits. In my case I was using a fullrange driver and...Leave a comment:
-
Ever see a video where they excite a plate at different frequencies and pour something like sand on it? It creates different patterns depending on the...Leave a comment:
-
Glad to hear you like it!
Since the water based stuff is so thin it requires thinner coats and thus more coats. Usually sanding is not really...Leave a comment:
-
This is what I use to give me a rough idea what to start with for baffle step compensation then tweak from there. Gives a decent explanation of the phenomenon...Leave a comment:
No activity results to display
Leave a comment: