Many many years ago I built a set of Statement speakers.
Love em to death but...
22 results in 0.0076 seconds.
-
Refinishing Statement Speakers - Adding Depth to Front Baffle - Will This Be An Issue
-
Carmody's Classix II help
Hey guys. Total amateur here. I'm building a pair of Paul Carmody's Classix II. Just wanted some help.
I just wanted confirmation that my... -
Any good videos for wipe-on poly?
I recently decided to get serious about how to apply wipe-on poly.
(Ok, you are correct, I'd finished a box and the poly finish as applied was too... -
Getting a smooth/lightly textured finish with DuraTex?
Based on some of the posts I found in these forums (particularly this one), I decided to coat my most recent DIY speakers in DuraTex. I ordered a gallon... -
Speaker Building - What must have tools?
Hi
I am starting out with speaker building, and have so far used the OS MT Kit. But i also want to try out other designs, for which there... -
LouC: A couple questions about your carpentry
Hi Lou:
I was going to send this as a PM, but I figured maybe I'm not the only one jealous of your work. Either you are very good at taking... -
Wood Pairing Ideas
Anybody have a good resource for ideas about wood pairing?
For instance, Walnut was recommended as a nice contrast to Mahogany for the project... -
Cerberus Subwoofer Build
After deciding to build a small subwoofer for my home office, I looked around for a respected design. Noticing the popularity of Roman Bednarek's Cerberus,... -
Overnight Sensation Build -- Two Sets
This string will describe the steps involved in building a set of Paul Carmody's Overnight Sensation speakers. I arrived at the decision to build the...Last edited by Soundslike; 03-29-2011, 05:30 PM. -
My new favorite tool: The veneer saw!
I'm trying to veneer my 2 pair of Aviatrices myself, instead of giving up and getting my carpenter friend to do it.
I wasn't happy with... -
What is the best way to paint mdf?
Just using spray paint on mdf is hopeless, so I was advised to use a brush on oil based paint, your own choice of color, and then sand, coat again and... -
Finishing cherry... a sanity check
My plans are to finish my current cabs by hitting the cherry with dark walnut Transtint and then to layer on as many coats of poly as I can will myself... -
Deathly afraid of trimming veneer
Be gentle. This is my first time with veneer.
I'm using 2-ply (hopefully to be a bit more durable and minimize telegraphic sins) and as I... -
MDF Seam Test Box with Trenches
Since my test pieces, with trenches, seem to be doing good so far I decided to try a full box test. I made two boxes. One I glued up last weekend and... -
Router tracks... Scratching Veneer
I have always done all my work with bare MDF and veneered later. This results in fun cutting the veneer out of the driver/port/terminal cup holes. This...
